When a vacuum is working as it should, keeping area rugs, carpets, and upholstered furniture is a breeze. But, you may have questions about what to do if your Dyson Ball vacuum is no longer sucking up dirt and dust bunnies. Not to worry, as we researched expert suggestions regarding a vacuum lacking suction power. Learn how to tackle clogs and other causes for a vacuum to perform poorly like a pro.
If your Dyson Ball vacuum fails to use its suction to remove unwanted particulates from your flooring, don't fret. Consider taking the following actions to remedy the problem and get back to cleaning house:
- Unplug the vacuum cleaner.
- Check the filter and give it a cleaning, if needed.
- Look for clogs and remove any found.
- Remove the hose and nozzle from the main section and check for obstructions.
- Check the motor to ensure it is in working order.
- Put the vacuum back together after removing clogs and cleaning the filter.
- Test the vacuum and any attachments for suction and pickup over a surface.
Treat your appliances with care and avoid running your vacuum over particulates that may cause undue damage. Keep your filter clean and remove clogs as soon as you notice changes in suction and performance.
Troubleshooting A Dyson Ball Vacuum
The Dyson Ball vacuum line was created to tackle dirt, pet hair, area rugs, carpets, and bare floors. However, a dirty filter, clogs, or poorly fitted attachments can lead to a loss of suction power.
Now and then, make an effort to keep filters clean and ensure that the rotating brush is free of debris and not hindered from picking up items. If the motor is burning out and causing the vacuum to perform poorly because of low power, replace parts or the entire appliance.
Overall, the Dyson Ball line of vacuums is a suitable appliance for suction power, maneuverability, and the ability to clean multiple surfaces with ease. Whether you use a canister or upright vacuum style, taking the device apart and cleaning it isn't challenging. Regularly cleaning your vacuum will help improve suction performance and prolong the life of the appliance and necessary parts.
Why Does My Dyson Not Have Suction?
If you find your Dyson doesn't have suction, it's usually due to a few simple reasons. A clog stops the rotating brush, interfering with the nozzle, hose, or main section. The filter is overburdened and needs to be emptied and cleaned.
Most vacuums come with a light that comes on if the filter is too full to pick up debris or a blockage present. If there is a problem with the motor or the belt snapped, usually there will be loud noises and a burning or chemical smell present. Check with the manufacturer to order replacement parts and utilize a warranty to keep your vacuum running.
A burned-out motor or damaged cord will usually lead to an outright inability for the vacuum to power on. However, dirty filters, snapped belts, something stopping the rotating brush, or a clog will reduce suction.
When using an attachment, ensure that it is securely fixed in place and does not allow any air to leak through, reducing the suction. The way a vacuum functions, there must be an ability for air to flow unobstructed.
Fix Your Dyson
Before you start fixing any problems with your Dyson, make sure it is unplugged, and there is no electricity traveling through the appliance. You may need to turn the vacuum onto its side, remove clogged attachments, or turn it upside down to remove any obstacles to suction. Debris caught in the rotating brush may have to be cut out carefully.
- Take a look at the filter, remove it and clean it thoroughly. Run it through some cold water for a few minutes and fully air dry before returning it to the appliance.
- Check the suction at the vacuum base and make sure the belt isn't snapped and the rotating brush can move freely. Check the suction levels at the point where the hose and nozzle connect.
- Remove any clogs, debris, or items inhibiting the suction function of the vacuum at the main underside, hose, and nozzle.
- If the motor is burned out or the belt has snapped, replace it or replace the vacuum altogether.
- Put the vacuum back together and test it on an easy-to-clean surface to see if the suction has returned to proper levels.
Remember, don't run your vacuum over certain materials that are more likely to damage the hose, nozzle, impede with the rotating brush, or will damage the belt.
How Do I Know If My Dyson Ball Is Clogged?
A Dyson is likely to alert its owner if there is a problem via lights turning on when a blockage is present, burning or chemical smells, or loud noises. A Dyson Ball that is clogged may have a change in pitch because the suction is being blocked. The rotating brush may struggle to turn. There may be little to no suction at the end of the hose or nozzle attachment.
How Do You Adjust Suction On A Dyson Vacuum?
Depending on what type of surface you need to clean with a Dyson vacuum, you'll want to make adjustments for the best results. Do consider changing the level to match the pile of carpet or bare flooring. Turn the amount of suction up or down as needed. Make sure your Dyson is free of any blockages, and the filter is clean.
The level setting for your vacuum will impact performance, so be careful not to go too low or too high, depending on the surface.
Check out this upright Dyson vacuum on Amazon.
Is It Normal For A Dyson Vacuum To Get Hot?
After keeping busy cleaning floors and messes with a Dyson vacuum, the appliance will become hot over time. Thankfully, most Dyson vacuums are equipped with a safety system to cut off the device when it becomes overheated automatically.
Running a vacuum that has become hot is dangerous because it can lead to sustained malfunctions, poor performance, and a shortened longevity.
Vacuums are likely to become hot if a blockage is present, the airflow is obstructed, or the motor has problems. If the Dyson is giving off noxious odors of burning, chemicals, or sounds like it is struggling to pick up, give it a break and check it out. Give your Dyson a rest period of 45 minutes or so to cool down after use.
Do Dyson Filters Need To Be Replaced?
Homes with a lot of foot traffic and plenty of dirt to clean may require replacing a Dyson filter more often. Typically, a filter only needs to be replaced every year and cleaned monthly. Be careful, as some Dyson vacuums may come with one than more filter. All filters inside a vacuum need to be clean and free of clogs or debris for the appliance to function optimally.
When cleaning filters, do not add any detergents and use cold water alone. Give vacuum filters 24 hours to fully dry before replacing to reduce the risk of electric shock, damage, or malfunction.
Check out these replacement filters for a Dyson vacuum on Amazon.
How Long Should A Dyson Vacuum Last?
Investing in a Dyson is an excellent way to keep your home and other spaces tidy. If a Dyson is treated with care and receives routine cleaning and maintenance, it should last 7 to 10 years. If you are lucky, a high-quality vacuum could last up to nearly 20 years.
Filters may need to be cleaned often and replaced as needed over the lifespan of the machine. Also, attention must be paid to the belt, motor, and rotating brush, which are all essential to the appliance's performance.
In Closing
We hope you feel more at ease when faced with a Dyson that is struggling to suck up dirt and dust. Chances are, a clog is bogging down your vacuum, or the filter needs to be changed. However, sometimes a snapped belt, burned out motor, or poorly attached nozzles and hoses are causing problems.
Regularly clean your vacuum and replace any parts that are wearing down. Make sure to use the correct settings on your vacuum, based on the type of flooring and power needs.
Before you leave, don't miss out on the following helpful articles:
How To Vacuum Area Rugs With A Dyson
How To Unclog And Clean A Central Vacuum System [A Complete Guide]
The floor attachment is not suctioning, and the other attachment suctions when the handle is down (when suctioning floor)