If you have a Dyson vacuum and it runs out of power even before you can start cleaning, it can be disappointing. But don't worry! We have compiled easy fixes for your Dyson vacuum to be up and running again.
Dyson cordless vacuums can sometimes experience battery issues. Unfortunately, your Dyson vacuum not holding charge is a common concern, but here are a few quick fixes you can try:
- Check for damage on the cable.
- Examine if the power outlet is working.
- Check for damage on the battery casing.
- Try charging again if no damage is found.
- Press and hold the power button.
- Unblock the vacuum airflow.
- Clean the filter.
- Replace the battery.
Are you still figuring out what you can do with your Dyson vacuum that seems like not holding a charge? Keep reading to learn the details on how to fix it.
What To Do If Your Dyson Is Not Holding Charge
If you have been charging your vacuum for a few hours, it should be ready to use for cleaning. But if it seems to be out of charge as fast as just a few minutes, follow these steps below to solve the problem:
1. Check For Damage On the Cable
If the power cable on your Dyson vacuum cleaner is damaged, it will not charge properly. This could be the source of your intermittent power issue. Inspect the cable closely for signs of wear and tear to check for damage. It might be due to a cable kink or wire exposure.
If the cable is damaged, stop using it immediately. The charger cable must be replaced right away.
2. Examine If the Power Outlet Is Working
Before tearing your vacuum apart, double-check your power outlet to see if it's operational. If it's not, your appliance's battery life will suffer. Make sure that your power outlet is working and take the vacuum cleaner out of the power outlet.
Plug in a high-energy-consumption appliance such as a hairdryer. Check if the other appliance works. If it doesn't, there could be an issue with the power outlet. In this case, you will need to contact an electrician to do any necessary repairs.
In the meantime, charge your vacuum using a different power outlet.
3. Check For Damage On the Battery Casing
It's easy to damage the cordless vacuum's battery casing. If something were to fall on it repeatedly, it will get cracked. It could also be damaged if it falls on the floor. This could lead to intermittent charging issues.
Scrutinize the battery casing on your vacuum. Check it for cracks and other signs of damage. If the battery is the culprit, you must purchase a replacement.
4. Try Charging Again If No Damage Is Found
Some Dyson vacuum cleaners have a flaw in which they show signs of a depleted battery even if they are fully charged. It can lead you to believe that the battery needs to be recharged when it just needs to wake up.
Reconnect the vacuum cleaner to a power outlet and wait for 30 seconds for it to charge. Unplug the vacuum cleaner and then turn it off. The Dyson vacuum should now be operating normally.
5. Press And Hold The Power Button
There is only one way to get your Dyson vacuum cleaner to work, and that is to have it fully charged. If it does not respond, go for another method to reactivate your appliance. When your cordless vacuum is fully charged, you can make it start working again.
Remove the vacuum's power cord and reconnect it to the vacuum. Hold down the power button for around 20 seconds. Turn off the power supply and remove the power cord again. After that, the vacuum should now work properly and should be ready to use.
6. Unblock The Vacuum Airflow
Dyson vacuums have an automatic shut-off feature. When the airflow is blocked, this feature will be activated. This way, it will avoid causing damage to the engine. It also prevents you from further clogging the vacuum, especially as large particles should not be forced into the mechanism.
Unplug the vacuum and let it cool before searching for blockages. Do not turn on the power until the blockage has been removed. Remove the vacuum attachments, such as the cleaner head. Inspect them for obstructions.
Empty the garbage can and remove all dust particles or dirt. Return the vacuum attachments to the machine. Press the power button and see if it works.
7. Clean the Filter
Have you cleared the airflow in your vacuum but still suspect a blockage? Then it's time to clean the filter since your vacuum cleaner's filter is prone to clogging.
Before attempting to remove the filter, unplug the vacuum and let it cool. Do not turn on the power until you have finished the job and turn it counterclockwise to turn off the filter.
Pull the filter to remove it from the vacuum then check for debris from the filter in the trash. Use cold water to clean the filter to get rid of all the dust.
Don't use detergent or hot water when cleaning the filter. Cold water is recommended to clean the foam element. Squeeze the foam while rinsing to remove dirt.
Wash the filter again until the water runs clear. Make sure that the filter is completely dry before putting it back inside the vacuum. To see if it works, press the power button. You can use your vacuum again as you normally do.
8. Replace The Battery
If you have followed all of the steps above, but you're still having problems with your vacuum, the last thing to do is to replace the battery. Warranties for Dyson cordless vacuums vary, so check if it's still covered.
To find out the duration of your vacuum's warranty period, look at the make and model. If it's still under warranty, you may get a free repair or replacement.
However, if your vacuum isn't covered by a warranty, you'll have to buy a new battery. The cost is determined by the make and model of your vacuum.
Click here to see this Dyson battery replacement on Amazon.
How To Maintain A Dyson Battery
Dyson creates vacuums that are easy to use and maintain. However, batteries have complex chemical structures and they may react to the surrounding elements. We've listed some tips to help you get the most out of your battery:
Avoid Using High Power Mode Often
For everyday cleaning, your vacuum is designed to be used in auto or normal mode. These are located at the top or bottom of your vacuum and can be changed.
The max and boost modes are intended for powerful, intensive bursts of spot cleaning. Using them regularly accelerates battery degradation. If your appliance has an eco mode, the run time is increased for a more thorough clean.
Don't Use Under Extreme Heat
Battery aging is accelerated in hot environments. As a result, it's best to avoid vacuuming your car in hot weather or leaving your vacuum in rooms that receive direct sunlight for extended periods of time. The same applies for cold porches and garages during the winter.
Store the Vacuum at Room Temperature
It's best to store your vacuum at room temperature to prevent the battery from degenerating and draining faster than normal.
Equipment like radiators can cause damage to the battery. We recommend storing it at temperatures between 64 °F to 82 °F, away from direct sunlight, and away from utility closets.
Let the Vacuum Cool Down
Extend the life of your battery. You can do so by allowing it to cool down after use or before reconnecting it to the dock to recharge.
If the temperature in the room falls below 37 °F, your vacuum will not operate or charge. This is intended to safeguard both the motor and the battery.
Let It Take a Break
Allow the battery to run down to empty at least once a month to help extend its life. If you have a spare battery, it's recommended to try swapping from time to time. That way, each can discharge and will help you to get the most of its power and use it longer.
Final Thoughts
Now that you know how to fix your Dyson vacuum if it's not holding a charge, it will be easier for you to maintain your cleaning device. But if you have tried everything and it still doesn't work, battery replacement may be your only option.
Just make sure to properly handle your Dyson vacuum to avoid this issue from happening again. It will prevent unnecessary expenses and keep your floors spotless all the time.
Check out these articles to learn more about maintaining your Dyson vacuum cleaner:
How To Unclog A Blocked Dyson Cordless Vacuum