The gap between your desk and the wall can be something you either leave alone or try to work around. However, this is entirely dependent on how your room is set up.
We have researched the best ways of dealing with this problem so that you can work comfortably in your office without that awkward feeling that something doesn't look right.
You can use pool noodles for wide gaps between a desk and a wall. Trim a pool noodle to fit snugly in the opening. You can apply some adhesive to it to ensure it stays in place. For smaller gaps, you can use silicone caulk or wood putty.
We all know what it feels like to struggle with a desk that doesn't line up with the walls perfectly. Whether you have a small or large gap, don't worry; we'll look at ways to achieve this perfect fit in this article, so read on!
Why Is There A Gap Between My Desk And The Wall?
Homeowners who have had difficulty getting their desks to fit correctly against the walls are not alone. Many people have experienced this problem at one time or another.
This can lead to problems like removing the wallboard to get the desk into a tight spot or, even worse, having to rip up drywall to make things fit.
So what causes these gaps?
The gaps between desks and walls are often caused by the uneven expansion and contraction of materials. Walls may be made of wood, concrete, or composite materials.
When the temperature changes, the walls may expand or contract, and the spaces between them expand and contract too. This usually happens to old buildings and houses.
Regardless if you have a wooden or concrete wall, your desk might not fit properly unless you add a gap-filler between the desk and the wall.
Alternatively, you might consider placing your desk in the center of the room.
The video below explains why you should try doing this:
How To Fill The Gap Between Your Desk And The Wall
The gap between desk and wall has always been a tricky place to work, but it can be fixed with a few tricks. Here's what you need to do:
1. Pool Noodles For Wide Gaps
A popular home improvement blog featured this answer from a DIY forum participant who posted that using a pool noodle is an effective way to fill a wide gap between a desk and a wall.
A pool noodle is a long piece of plastic foam tubing that can be slit to fit the width of the gap.
Trimming the pool noodle to fit is as easy as slicing it into pieces of the desired length. Then you must insert them into the gap to completely hide it.
2. Silicone Caulk Or Wood Putty For Narrow Gaps
Silicone caulk is a thick, flexible sealant perfect for filling narrow gaps. You can purchase it at hardware stores or home improvement centers.
The material is ideal for filling gaps between baseboards, walls, and other surfaces. If you're planning to paint the caulk, it's best to use acrylic caulk since paint won't bond to silicone well.
Silicone caulk comes in both a caulking gun and tube form. When installing the caulking, you must apply a bead of the caulk to the gap between the desk and the wall.
Then, smooth out the bead so it is flushed with the wall—same thing with wood putty.
How Long Does It Take For Silicone Caulk To Cure?
If you plan on using silicone caulk to repair a crack or joint in your home, you will want to be sure to let it cure properly before applying any finishing touches. It will usually cure in about 24 hours.
However, if it will take longer, check the expiration date on the label.
What Is The Biggest Gap Silicone Caulk Can Fill?
Remember that the amount of silicone needed depends on the gap size. A single bead of silicone can cover gaps up to a quarter-inch wide. However, you may need more than one bead to cover more significant gaps.
Are Wood Putty And Wood Filler The Same Thing?
Wood putty is a soft, pliable paste made of finely ground sawdust, binder, and thinning agent. It is available in small containers and can be used as a filler for cracks, holes, scratches, and other imperfections in the wood.
Wood putty can be applied with a putty knife or fingers and left to cure. On the other hand, a wood filler is the same, except it hardens once cured. Unlike wood putty, you can smoothen the surface with sandpaper where you have the wood filler applied.
How Do You Make Wood Filler Blend Naturally Between Gaps?
For those who want to bring a particular element of rustic charm to their living room, using faux wood filler in the right way can be a great addition.
Making wood filler look real is easy if you are willing to get creative. You can use any wood filler, such as pine, oak, or wood type, you prefer.
For a natural finish on your wood filler, you will need to sand the surface where you will be applying the filler. Sanding the area will give you some sawdust to mix with the filler. Once the sawdust is ready, mix it with the filler and apply it evenly to the surface.
When applying the filler, make sure the wood filler blends with the existing wood. Apply it evenly, so the wood filler does not appear crooked. Wait for it to dry and sand the surface with 220 grit sandpaper.
Cracks And Gaps In Furniture: How To Cover Them?
If you want to make sure that you seal the gaps in your furniture correctly, you have to be careful. Leaving the gap unaddressed allows air to seep through and causes your furniture to age faster than it should.
Silicone caulk is great for filling in cracks and gaps in furniture. It's flexible, allowing it to expand and contract with the wood, so there's no worry about cracking or warping.
Are Desks Supposed To Be Pressed Against The Wall?
There are no hard and fast rules because it all boils down to personal preference. Some people feel that having a desk in the middle of the room makes the room feel smaller.
On the other hand, some people feel that having a desk in the corner of a room creates more space for their items or guests to gather.
If you want to maximize a small space to accommodate your laptop and other computer equipment, you can do this by making a few simple adjustments.
What Direction Should A Desk Face?
According to Vastu Shastra, specific places in a house are associated with particular qualities.
These include the southwest direction as the most promising area, where work desks must be situated, and the northeast direction as the ideal direction you must face while at work.
Vastu Shastra is the study of harmonizing the energy flow around a building to affect a person's well-being positively. In modern times, many architects and designers have adopted Vastu Shastra principles in their designs of homes and office buildings.
Should My Desk Face The Window?
The idea of the work area is to create an efficient work environment where you can do your best work. In most cases, a person who wants to perform his best work needs to have a great view.
The window is one of the best options for creating such an environment. It is also one of the best ways to create balance in the room and to provide a sense of space and light.
However, some people don't like their desks facing the windows because of the natural light and distractions.
It can be very tempting to stare out a window to see what's happening outside. Sometimes, though, when the sun shines directly into the room, it can be distracting and even limit your view.
One way to solve this problem is by turning away from the window or facing the opposite direction. You still enjoy the sunshine but don't have to deal with the glare.
Should A Work Desk Be In The Living Room?
One of the biggest challenges in designing the perfect room is finding a space that serves multiple functions. In today's fast-paced world, people who work from home have found themselves with limited office space in their homes.
The use of a desk in the living room is an effective way to increase your work area without having to purchase an additional piece of furniture.
As long as the location is well thought out, and the table is large enough to accommodate all the needed materials, a desk behind a sofa is an ideal solution.
Should I Leave Space Between My Desk And The Wall?
This question might be counterintuitive to the topic, but many people prefer to have their desks against the wall.
The ideal distance between your desk and the wall depends on your preference.
It's important to understand that distance can influence the comfort of your workplace, which in turn can affect your productivity and overall performance.
Whatever your preferred distance, ensure a minimum of 5 feet of clearance from behind your desk to allow plenty of room for people to walk without hitting you from behind.
This article taught us how to close the gap between the wall and the desk. We learned that there are many different ways to make this happen. It also shows us the other adjustments that can be made to achieve a perfectly aligned desk.
These posts are worth it for related topics: