If you have a fur baby at home, you will probably enjoy the benefits of using a Dyson animal vacuum because it can pick up fur and dander thanks to its powerful suction feature. However, your vacuum cleaner will also need some cleaning over time. So how do you clean a Dyson animal vacuum? We've researched this topic to provide you with the answer.
To clean a Dyson animal vacuum, follow this simple guide:
- Turn off the vacuum and detach the filter from the canister.
- Put the vacuum down and remove the second filter from the round housing.
- Gently tap the filter on your kitchen sink or outside to remove excess dust.
- Using a slow stream of cold water, rinse your filter until the water passing through the filter turns clear.
- Carefully rub the filter using your hands.
- Use warm water to fill up the filter and then give it a shake to rinse the inside part.
- Place the filter in a space where you have access to proper airflow and is far from heat and flames.
- Let your filter completely dry for at least 24 hours before you reattach it to the vacuum.
- Clean the nozzle and dustbin with a damp cloth.
- Wipe the exterior with a damp cloth for a final clean-up.
We will dig deeper into this topic and go through a more detailed step-by-step guide. Also, we will discuss how a Dyson animal vacuum differs from a regular vacuum cleaner, so keep reading to learn more. With that said, let's get right into it!
How To Clean A Dyson Animal Vacuum
Dyson has managed to create a type of vacuum that can pick up smaller, stubborn dirt particles that a regular vacuum cleaner cannot clean.
Pet hair and dander are two of the things most regular vacuum cleaners fail to pick up. Good thing Dyson has found a solution to take the technology of vacuum cleaners to the next level.
If this is your first time cleaning a Dyson animal vacuum, you can simply follow these steps.
Detach The Filters
The first thing you have to do before cleaning any appliance or electronic equipment is to shut it down or unplug it. This way, you will prevent any possible electrical hazards.
Once your vacuum is safe to handle with bare hands, detach the filters from the unit. The Dyson animal vacuum cleaner has two filters. One is located inside the canister, similar to a regular vacuum cleaner, while the other filter is inside the ball-like housing at the bottom part of the vacuum.
To remove the first filter, locate the red button of the canister. Press it to release the canister, then pull it upward and away. Pull the top handle up and lift the latch to release the filter.
For the second filter, you have to lie the vacuum down. Search for the blue-colored dial on the side of the ball-like housing below the canister. Turn the dial in a counterclockwise direction until the housing is unscrewed. Turn the filter a little to the left and then pull it out carefully.
Clean The Filters
After successfully taking the filters out, bring the filters to your kitchen sink. Gently tap the filters on the edge of the sink to remove the excess dust. After that, open the faucet and put the filters under the running water.
Make sure that the stream is not too strong so you will not damage the filters. You can rub them with your hands to get rid of excess dirt. Also, you should avoid using detergents or any type of cleaning soap when rinsing the filters.
Once the water passing through the filters is already clear, fill the first filter with water and give it a final shake before turning the faucet off.
Dry The Filters
The next step you should take when cleaning your Dyson animal vacuum cleaner is to dry the filters. Avoid using a clothes dryer when doing so. Instead, put the filters in an area that has access to good airflow.
Allow the filters to air dry for a minimum of 24 hours, or until it is completely dry. You should avoid attaching the filters back into the unit when still wet. The excess water can reach the motor system and cause a short circuit or other mechanical malfunctions.
Clean The Nozzle
Using a damp cloth with microfibers, wipe the nozzle until you get rid of all excess dirt and dust particles. Just like the HEPA filters, you must avoid using any detergents to avoid causing problems to the nozzle.
Empty The Dust Bin
The dustbin is one of the most important components of your vacuum cleaner. It is where all the dirt and dust particles your vacuum cleaner picks up, go to.
When giving your Dyson animal vacuum a cleaning, do not forget to empty the bin. After getting rid of the dust inside the bin, you can wipe it with a damp cloth to remove the excess dirt.
Clean The Exterior
Lastly, using a damp cloth, give the outer parts of the vacuum a polish. You can use a damp cloth to carefully wipe the surface of the rest of the parts until you get rid of the remaining dirt and dust particles.
Is The Dyson Animal Vacuum Better Than Regular Vacuums?
Because of its powerful filtration and suction feature, the Dyson animal vacuum is said to be Dyson's best vacuum cleaner.
Unlike the regular vacuums that often fail to suck pet hair and other smaller particles, the Dyson animal vacuum can clean dander and fur from rugs and carpets. It has a whole unit filtration system, which makes its suction power more efficient than the regular vacuum cleaner.
Dyson Vacuum Cleaner Has Low Suction Power - What To Do?
If you have experienced your Dyson vacuum having low suction power, it does not necessarily mean that something is broken in your vacuum. Before you call the maintenance team, try to clean the filters and empty the bins first.
If the vacuum continues to have low suction power after cleaning the filters and dustbin, you can have your vacuum checked by Dyson's maintenance and repair personnel.
Also, Dyson offers a 5-year warranty to their users if the user finds something wrong with the vacuum.
How Long Do Dyson Vacuums Last?
Dyson company has become famous due to its durable and excellent quality products. Even if you regularly use your Dyson vacuum cleaner, you can expect the unit to last up to seven to ten years, but of course, if you do not properly care for your Dyson vacuum cleaner, it will be less likely to last in a shorter period.
How Often Should I Replace My Dyson Vacuum Filter?
If you are using your Dyson vacuum cleaner regularly, you should clean it once every month. However, despite regular cleaning, Dyson advises that you replace the vacuum filter once every 12 months.
The vacuum filter is one of its most important parts. When you do not regularly attend to your filter, it may fail from filtering microscopic particles that can reach the motor system.
Failure to replace the HEPA filters after 12 months of regular usage can also cause vacuum issues. HEPA filters are fibrosis filters often made from fiberglass or plastic fibers. When the filter is overly used, its pores can become larger, thus, causing the filter to be less efficient.
Why Is My Dyson Animal Vacuum Not Turning On?
If your Dyson animal vacuum cleaner doesn't turn on, do not panic yet. The problem could be caused by any of the following reasons.
- The unit is not properly plugged into the power source.
- You didn't turn the power switch on.
- The circuit breaker is tripped.
- The motor is experiencing overheating.
- Faulty power cord.
When experiencing issues that need a professional's attention, you can take advantage of Dyson's 5-year warranty instead of doing the job on your own to avoid making things worse.
Taking care of your vacuum cleaner is a must if you want it to have a longer lifespan. Regular cleaning and maintenance checks are the best way to show we care for our equipment.
Remember to handle the vacuum's parts carefully when cleaning it, and never use any type of detergent when doing so to avoid causing problems to its crucial parts.
Before you go, don't forget to check out these posts, too: