How To Remove Drawer From Ikea Malm Dressing Table

Ikea furniture is notorious for its flat-pack design and assembly procedures, but sometimes we need to disassemble or remove a part. If you have an IKEA Malm dressing table, you might be wondering how to remove the drawer. Well, you've come to the right place. We've done the research for you and have the easiest method to remove a drawer from the dressing table. 

To remove an IKEA Malm dressing table drawer, follow the steps below:

  1. Open the drawer
  2. Locate the screws under the drawer and remove them
  3. Pull the drawer away from the bracket by lifting up and out

We've given you the basic steps to remove the drawer from the dressing table, but keep reading as we go into detail about how to do each step. We'll also answer some other questions you might have about Ikea furniture. 

Pull the drawer away from the bracket by lifting up and out

Removing The Drawer

If you've owned this dressing table for a while, you might have noticed that the drawer doesn't extend all the way out. This is to help prevent the dressing table from tipping over. Thus, figuring out how to remove the drawer can certainly be confusing.

Focused details on a drawer

On many types of tables or dressers with drawers, you can just pull them out. Unfortunately, this dressing table requires a little more work. The steps below are essentially the reverse of how you put the dressing table together. Additionally, if you are wondering how to make the drawer extend farther, there are also many guides and videos online that will show you how to hack the drawer.

Step 1: Open The Drawer

This step is as simple as it sounds. Open the drawer as far as it will go. Take a look underneath. You should be able to see where the drawer is attached to the bracket. 

Step 2: Remove The Screws

Once the drawer is extended, you should be able to see how it's attached to the bracket. Using a screwdriver, remove the screws underneath. There should be two screws total, one on either side. 

Step 3: Remove The Drawer

After you've removed the screws connecting the bracket to the drawer, you should be able to pull the drawer away from the bracket. Next, grab the drawer on either side and pull the drawer towards you and up.

If it doesn't come away easily, you may need to reach to the back of the drawer and push out the metal clip connecting it to the bracket at the back. Take a look at the assembly instructions to your dresser so you can reference it for pictures of how the drawer is held in place. 

How Long Does It Take To Assemble An IKEA Malm Dressing Table?

Close up of installation of wooden drawer in contemporary cupboard cabinet.

Assembling flat-pack furniture can be tedious and time-consuming, so you may be wondering how long it will take you to put together the IKEA Malm dressing table. Well, it really depends on how quick or experienced you are at assembling this type of furniture, but you should expect to spend at least 30 minutes assembling the dressing table. 

The assembly instructions that come with an IKEA Malm dressing table provide illustrations of each step, so if you are struggling to follow them, check out a YouTube video. The video below explains how to put it together.


Will IKEA Replace Broken Parts?

close up of lower broken shelf locker

It can be really frustrating when you receive an item of furniture and some of the parts are broken or damaged, or maybe you accidentally damaged them yourself. Either way, you're left wondering whether your product is fixable or whether you're just out of luck. 

Whether IKEA replaces broken parts depends on how the part was broken. If the fault lies with IKEA, they will replace the part for you. If you broke the part yourself, some conditions might apply when it comes to a replacement piece, so you should contact IKEA's customer service department to ask about their policy. 

IKEA will replace broken or faulty parts for you if the fault lies with them, and it can often be done in-store. Take the broken or faulty part with your receipt to your local IKEA store. IKEA stores aren't located in many cities, so if your local store is not so local, you can also call their customer service line. They may be able to ship you the replacement part, saving you a trip. 

If the broken piece is a fitting and has the 6-digit code located in the assembly directions, you can order a replacement piece online. If you no longer own the instruction manual, IKEA also lists copies of their product's assembly guides on their website. It can be located under the product's description. If you are still unable to find the 6-digit code, stop by the recovery section in your local IKEA store. 

Are IKEA Drawers Soft Close?

Soft-close drawers are drawers that close softly and do not make a loud noise when shut. You may be wondering if this is a feature of IKEA drawers. Unfortunately, not all IKEA drawers are soft close, but IKEA does sell a soft-close add-on that you can install yourself.

How Can You Make IKEA Furniture Stronger?

Assembly of an Ikea furniture drawer. A Caucasian woman positions the elements of the drawer.

IKEA is known for its affordability, but not for its furniture's sturdiness. Fortunately, there are ways you can make IKEA furniture stronger.  There are a few methods you can try, and while it's usually easier to do these while you're assembling your furniture, you can also try some of them on furniture that is already assembled. 

Wood Screws

Many IKEA products come with wood screws. One way to make your furniture stronger is by replacing these screws with a slightly longer version of the same screw. Just make sure that the screw isn't too long, or it'll pierce through the other side of the furniture. 

You can also add additional screws to locations where pieces of the furniture connect. Just be sure to mark out and drill starter holes before inserting the screws. 

Also, over time, screws can become loose or worn, so be sure to regularly check the screws on your furniture to see if they need tightening. This will not only strengthen your furniture, but it can also make it last longer by removing stress from other parts. 

Click here to see wood screws on Amazon.

Wood Glue

If you don't plan to disassemble your IKEA furniture anytime soon, you can take a more permanent approach to strengthen it.

Wood glue can be applied to any joints where the wood fits together, or you can apply it to the screw holes. It's best to do this as you assemble your product, but you could always disassemble a piece you already have and apply it then. Be careful not to add too much, or it could leave the joints looking messy.

Click here to see Elmer's Carpenters Wood on Amazon.

Steel Braces

You can also reinforce IKEA furniture by adding steel braces. Steel braces can be applied to the underside or corners of your furniture, and as a bonus, they are relatively inexpensive. You can often find sets of braces that also come with the required screws. 

Click here to see Alamic Straight Brace on Amazon.

Final Thoughts

Though removing a drawer from an IKEA Malm dressing table isn't as easy as just pulling it out, it's still a pretty simple process. Hopefully, our short guide above has helped you figure it out. Remember that most assembly guides can be found on IKEA's website. This will help if you need a visual guide to locate the screws. 

If you're wondering whether your IKEA flatpack furniture comes with tools, check out this post: Does IKEA Furniture Come With Tools?

If you already own a piece of popular IKEA furniture and are wondering how to paint it, check out this guide: How To Paint An Ikea Billy Bookcase

man tinkering a dressing table with a drawer with a screwdriver. How To Remove Drawer From Ikea Malm Dressing Table

Leave a Reply

Your email address will not be published. Required fields are marked *