The drain hose of a washing machine is one of its essential parts. It is responsible for removing wastewater after every washing of clothes. We have thoroughly researched the internet about securing a washer drain hose since this component plays a huge role.
Disclosure: We may get commissions for purchases made through links in this post.
Securing the washer drain hose is easy. All you need to do is use and insert clamps at both ends of the drain hose. These clamps are excellent accessories to prevent the drain hose from slipping off its connection to the washer. Additionally, you can use tape to hold the drain pipe and hose together to prevent the latter from slipping off.
We have mentioned only the simplest form of how to secure the drain hose of a washer. If you wish to know more detailed information on how to do it properly, it would be best to keep reading. Doing so might also answer some of the additional questions running through your mind. Let's delve into deeper details!
What Is The Importance Of A Drain Hose In A Washing Machine?
As mentioned, the purpose of a drain hose is to bring dirty water to the main sewer line.
One cannot afford to be without such a vital apparatus for maintaining a controlled water collection. Therefore, it is crucial to be familiar with replacing or securing the drain hose on a washing machine. Learning this new method will make it easy and quick to switch out a drain hose that has become damaged or worn.
Some washers contain assembled hoses, whereas others have a single component. Moreover, the separator plate on the back panel of a washing machine joins the two hoses.
How To Properly Install And Secure A Drain Hose In A Washer
Below is the step-by-step guide on how to install or replace a washer drain hose. It would be best to follow it properly if you want to achieve the best results.
Step 1: Prepare The Materials Needed
The first thing you should do before you even start installing the new drain hose of your washing machine is to gather all the tools and materials you need for the process.
Purchase a high-quality drain hose at the nearest local hardware store around you. It is highly advisable to either contact the washer manufacturer or review the manual to know the correct drain hose type your machine needs.
The other materials you will need are:
- adjustable wrench
- new clamps, if necessary
- drain hose
Step 2: List Down The Specs Of Your Washer
If you wish to achieve an excellent drain hose installation, it would be best to take your time to list it down on a piece of paper and research the specifications of your washing machine. And don't forget about its draining process!
If you want to be sure of every detail, you can confirm it in the manual provided by the manufacturer. You can easily purchase the appropriate drain hose for your washer by doing so. Additionally, it will also aid you in correctly installing it.
Furthermore, you should also list down the serial number and model of the washing machine, which can also be of great help if you bring it to the hardware store when choosing a drain hose or other materials.
Step 3: Check For Safety
Before starting, know that it is a general rule to turn off the water supply connected to your washing machine. It is also a must to switch off the power to the washer. These steps are essential to prevent accidents like hazardous leaks and electric shocks.
Furthermore, it is mandatory to wear safety gear to protect yourself even though the probability of the abovementioned accidents is not high. You can consider wearing rubber boots and gloves during the entire process.
Step 4: Get Rid Of The Old Hose
You will need to dispose of the old drain hose or line in this step. All you need to do is find the clamps at the end of the drain hose. You can locate it at the back of the washing machine, as mentioned above.
Removing the clamps on the drain hose is easy. You just need to detach the two screws on it using your screwdrivers. Once you finish removing the clamps on the drain hose, pull the hose away.
Additionally, it is necessary to check for any damage or corrosion on the clamps. And it would be best to purchase new ones if you notice apparent damage to the old ones. It is why preparing new clamps before starting is a good idea.
Step 5: Clean The Hose Connection Area
It would be a great measure to clean the hose connection area if you want the installation process to be successful. It is indispensable, mainly if the area is full of dirt and mold accumulation. Keep in mind that it is inevitable for a drain hose to be dirty, especially since it always gets in touch with water.
You can use a vacuum cleaner to remove all the filth. On the other hand, you can utilize a wet cloth if you don't have a vacuum cleaner. Ensure you clean the area thoroughly.
Step 6: Insert And Secure The New Drain Hose On The Washing Machine
After cleaning the connection plate, you are ready for the drain hose insertion. Good thing that it is not as complicated as you think it is.
When a washer drain hose isn't staying put, one thing you can do is place it together with the drain pipe and wrap duct tape around them. The drain pipe and drain hose must be completely dry before you wrap them with tape. In most cases, this resolves the issue altogether.
Another approach is to fasten the hose clamp to the closest available wall.
Insert the drain hose's end into the drain pipe and secure it with the clamp. Note that it should be six inches from the pipe's apex.
Once you finish tightening the clamp, you can fasten the slack end to the nearest wall. It would be best if there is a stud near it; you can easily attach the clamp to it. Just insert the clamp's loose end into the stud and tighten.
On the other hand, to attach a clamp to drywall, you must:
- prepare an anchor hole
- place a plastic anchor
- screw or tighten the clamp end into the anchor
Additionally, if it is a masonry or brick walls, you must:
- prepare a masonry bit and drill it into the surface
- install the anchor
- put the screw to tighten the clamp end into the anchor
Any of these approaches will ensure that there will be no leaks during the washing of clothes.
Step 7: Finishing The Last Few Details
The last step for the drain hose installation process is to check if it is functioning well.
Turn back on the water supply after connecting the drain hose to the washer. After that, switch the power on of the washing machine, then try to check how the water drains from the hose.
If you notice some leaks as water drains on the newly installed drain hose, you need to adjust the clamps again. However, it is advisable to do it carefully.
How To Maintain Washer Drain Hose?
While you only need to set up the drain hose once, it is still important to always check its shape. You should fasten it as needed, clean it, and ensure it is always in proper working condition.
Create A Filter
After properly installing and connecting the drain hose to the washer, you can cover it with a filter. Good thing that you can create a filter from anything from an old sock or pantyhose. Alternatively, a prefabricated piece of aluminum or nylon is available on the market that you can buy if you don't want to do the DIY alternative.
Get Rid Of All The Dirt
You don't have to worry about lint and dirt from your clothes clogging up the drain since eliminating it is easy. You just need to remove the filter regularly. But in case you haven't cleaned or disposed of the dirt on your washing machine in the past two months, it would be best not to use it until you wash it.
Most of the dust and debris will end up in the filter, so give it a quick spray with the garden hose to get rid of it. Furthermore, there could be a great deal of grime close to where the washer rests. So, to ensure good drainage, you should clean the washing machine drain hose before each usage.
What We Have Learned
Securing the drain hose of a washer is a straightforward thing to do, and it is a must since it is one essential component that plays a huge role. You need to carefully follow everything discussed in this post to keep it in place. Moreover, you should never forget to maintain your drain hose if you want to make the most out of it and keep it working correctly.
You have finally made it to the end! We hope this post answers all of your questions. If you wish to continue reading, you can check these posts out!