Remote controls have been a lifesaver for television owners. They help you switch channels or make changes to the TV without having to go near it. But sometimes the tiny buttons on the remote can be overwhelming, especially if you have no idea how to connect it to your television. If you're struggling to navigate a Spectrum remote control, we've gathered information to help you!
To be able to use your Spectrum remote control, you need to program it using the Spectrum Guide, which will walk you through the process. The remote control will automatically detect the brand of television you're using, or you can manually input the designated code for the TV brand you are using.
These types of remote control can be tricky if you're not a tech savvy, but once you understand how they functions they can be a great tool to make watching TV easier. If you would like to know more about the Spectrum remote control, keep reading this post!
How To Program a Spectrum Remote Control?
A Spectrum remote control is a special type of remote that allows you to navigate the television that's connected to the Spectrum receiver.
Once the remote connects with the television, you can use it to browse different channels, access the DVR installed in the cable receiver, record shows you would like to save, or adjust the volume.
However, you have to connect the Spectrum remote control to the television you are using in order for it to work.
You can program the remote by accessing the Spectrum Guide, but if that doesn't work, you can set up the remote and TV by following one of the procedures below.
Programming The Spectrum Remote Control Using Auto-Search
To program the Spectrum remote control manually, follow this procedure:
- Turn on the TV that you'd like to program. Make sure it is properly connected to the Spectrum receiver.
- On the Spectrum remote control, find the "MENU" and "OK" buttons. The "OK" button is located in the middle of the diamond-shaped navigation pad on the remote control, while the "Menu" button is the second to the left blue button above the diamond-shaped navigation pad, or right below the diamond-shaped navigation pad.
- Press and hold the "MENU" and "OK" buttons at the same time until you see the "INPUT" button on the remote blinking twice.
- Once the "INPUT" button blinks twice, press the "TV POWER" button until the "INPUT" button lights up continuously.
- Aim the remote at the TV and hold the up arrow until the TV turns off.
Once you are done following the above-mentioned steps, the remote should be able to save the code. You can turn the TV on and try to navigate using the remote to test if the Spectrum remote control is already connected to the TV.
Click here to see this Spectrum remote control on Amazon.
Programming The Spectrum Remote Control Using Brand Codes
Another way to set up a Spectrum remote control is by manually putting in the code of the TV brand. You can do this if the remote cannot sense the TV brand you are using.
This doesn't mean that the remote's sensor is broken or the TV you are using isn't on the list of TV brands that are compatible with the Spectrum remote control. Sometimes the remote just fails to pick up the signal and detect the TV.
In order to program the Spectrum remote control using brand codes, you have to know the code associated with the TV brand you are planning to connect to the remote.
Below are the codes Spectrum uses for popular TV brands:
- Sony: 10810, 11685
- Sharp: 12360, 12402, 13867
- RCA: 11547, 10178, 11447, 10047, 10051, 10093, 10679, 11047, 11147, 11247, 11347, 11781, 11948, 11953, 11958, 12002, 12187, 12247, 12434
- Samsung: 12051, 10650, 10178, 10060, 10766, 10814, 11959, 13993
- LG: 11423, 10178, 10017, 10442, 12864, 12867
- Philips: 11867, 11454, 12597, 11394, 10171, 12622, 13623
- Dynex: 12049, 11463
- Insignia: 12049, 11423, 11564, 10171, 10463, 11204, 11326, 11385, 11517, 11641, 11660, 11892, 11963, 12417, 12751
- JVC: 10650, 11774, 10463, 11923, 12321, 13393
- Magnavox: 11454, 12597, 10051, 10802, 11198, 11365, 11913, 11963, 11990, 13623
- Mitsubishi: 11250, 10178, 10150, 11797
- Toshiba: 11524, 10156, 10650, 10060, 10154, 11343, 11369, 11704, 11935, 11959, 12684
- STCL: 12434, 11756
- Vizio: 11758, 12707, 10864, 11756, 10885
- Zenith: 11423, 10178, 10017, 10463, 11661, 11365
- Westinghouse: 11712, 13470, 13579, 12397, 10451, 10885, 10890, 11282, 12293, 13094, 13382, 13908
Programming the Spectrum remote using codes is similar to the way you program it using auto-search. Only this time, once the "INPUT" option blinks twice, you need to input the 5-digit code using the number keys in the remote.
The "INPUT" button will blink twice to confirm the code. After that, test the remote with a few navigations, like trying to turn the TV off using the remote. If the remote is still not connected to the TV, try repeating the method again.
What To Do If The Spectrum Remote Control Isn't Working
Is your remote not allowing you to switch channels? Has the volume key stopped working? Is the remote's response a bit sluggish? If your Spectrum remote control isn't serving its purpose properly, then it is a clear sign that there's a problem with the device.
There can be a few possible reasons why a Spectrum remote control will not work. You don't need to panic and purchase a new Spectrum remote control right away.
Before you throw that remote in the trash, you can do a little troubleshooting and see what the problem is.
Batteries Are Dead
The most common yet overlooked reason why a Spectrum remote control stops working is because the batteries need to be changed. Try changing them and see if the remote will start working again.
Something Is Blocking The Signal
Another possible reason why the remote isn't working is because there is a hindrance that's blocking the signal from the remote to the cable receiver. You can check the cable box to see if there is anything preventing the remote to connect properly to the receiver.
Remote Is Not Connected To The TV Cable Receiver
In order for the remote to work, make sure that the Spectrum remote control is connected to the cable receiver. You can press the "INPUT" or "CBL" key in the remote. The digital receiver will restart and reconnect to the remote once turned on.
Can You Use a Spectrum Remote Control As a Universal Remote?
You can use the Spectrum remote control as a universal remote if the type of remote control you have is the Spectrum Universal CLIKR-5.
This type of Spectrum remote control will allow you to control the TV, audio and media devices, and BLU-Ray player using one remote control.
Where Is The Setup Button On The Spectrum Remote Control?
Where Is The Setup Button On The Spectrum Remote Control?Find the setup tool by pressing the "OPTIONS" button in the remote. The setup page will allow you to make changes in the programming of the cable setup.
Can You Replace Your Spectrum Remote Control With a New One?
Absolutely! Spectrum allows you to use different remote controls as long as you pair them up with the existing cable box.
Spectrum is offering an option to replace your Spectrum remote control in case it is no longer working. They will mail you a new remote when you request a replacement.
You can also purchase a new one if you've lost the old one. To sync the new remote to the cable receiver and TV, you just need to follow the same steps you followed when you set up your old Spectrum remote control.
Once you're done programming the new remote, it should work like the old one.
Click here to see this Spectrum remote control on Amazon.
Does Spectrum Remote Control Work With All TV Brands?
Spectrum remote controls can be paired with the most common smart TV brands on the market. You can check the Spectrum Guide and see if your TV brand is part of the list.
If the remote control does not automatically connect to your TV during the setup procedure, the problem might not be because the TV brand you are using is not on the list, but because the remote just failed to sense it.
Once you confirm that the Spectrum remote control is compatible with your TV, you can manually enter the code associated with the TV brand you are using.
Wrapping It Up
There's no denying the fact that remote controls have been a great help to many TV owners, especially to those who do not want a separate remote control for the cable box and the TV.
Although not everyone is a tech savvy, understanding the basics of setting up a Spectrum remote control will not take much of your time.
Just make sure that you properly connect the remote to your TV, and you can sit back, relax, and enjoy binge-watching your favorite shows with ease!
Check out these related posts: