If you're having trouble finding a way to fit the shower curtain on the shower bench without making it look like it's bulging out, then you're not alone. We've all been there before, so we decided to research the answer to this problem and share it with you.
To use a shower curtain with a shower bench, you can follow these steps:
- Choose the right curtain size
- Determine the ideal curtain height
- Assemble the curtain
- Determine shower bench placement
- Slit the part of the curtain where the shower bench is bulging out
You're about to learn a trick to help you make the most of your shower curtain. Read on as we discuss each of the steps in more detail below. These steps will teach you how to adjust the shower curtain to fit correctly and not look like the shower bench is pushing it out behind it.
How To Adjust A Shower Curtain To Fit Over Your Shower Bench
One of the most common issues with shower curtains, when used with a shower bench, is that the bench looks like it's trying to escape the shower curtain. You can see this because it bulges out from the shower bench.
The good news is that you can easily make the necessary adjustments so that it does fit perfectly. You don't need any special tools to change your shower curtain.
Here are the steps:
Choose the right curtain size
Measure the width of the shower bench and purchase a shower curtain slightly wider than the bench. This will allow the curtain to enclose the bench and provide adequate coverage fully.
Determine the ideal curtain height
Install the shower curtain rod at the desired height above the bench. Ensure the rod is firmly secured and will not move or shift when the curtain is drawn.
Assemble the curtain
Assemble the shower curtain according to the manufacturer's instructions. This may involve attaching the hooks to the curtain and the rod.
Determine shower bench placement
Once the shower curtain is assembled and hung on the rod, place the shower bench inside the tub.
Make sure the bench is positioned where the user can comfortably move in and out of the tub without feeling restricted. Also, ensure that it is fully enclosed by the curtain when drawn closed.
Slit the part of the curtain where the shower bench is bulging out
When using the shower, draw the curtain closed around the bench to keep water away from the edges of the curtain. When you are finished, tuck the curtain inside the bathtub so it won't drip water on the floor.
You can slit the shower curtain around the shower bench to tuck it in the gap between the shower bench. This way, you don't have to worry about the curtain touching and dripping water on the shower floor.
You may refer to the video below for a detailed illustration:
How Do You Shower With a Transfer Bench Safely?
A transfer bench is a helpful tool for people who have difficulty getting in and out of the shower due to mobility issues. Here are some tips for showering safely with a standard transfer bench:
- Adjust the transfer bench height so that it is high enough to allow you to comfortably sit on and hold on to the handrails while taking a shower.
- Sit on the bench and slide your one leg into the tub, then slide your other leg into the tub. The chances of slipping are low if you do this instead of putting your two legs together at once.
- Once you have both legs in the tub, move to the shower wall, closer to the handrail. You don't want to be seated on the outer part of the bench as it may not be able to support your weight. The outer part of the bench is intended to help you balance while transferring onto the inner part of the bench.
Note: This guide applies only to a standard transfer bench.
Newer transfer benches have a swivel mechanism that allows the user to easily rotate the bench seat, providing greater flexibility and ease of movement.
How Can I Keep My Shower Curtain From Blowing In?
A shower curtain can be a nuisance when it's blown and makes a mess on the floor. Here are a few tips to keep your shower curtains from blowing in:
- Attach binder clips or any curtain weight on the edge of the curtain.
- Magnets can be a better alternative if you have a metal tub.
- You can also use suction cups to hold a shower curtain in place.
Attaching curtain weight
Binder clips are a commonly used shower curtain weight because they are easily accessible and can be attached to the bottom hem of the shower curtain to help weigh it down and keep it in place.
You can also use other items, such as shower curtain weights or small bags filled with pebbles or sand.
The key is to use something heavy enough to weigh down the shower curtain but not so heavy that it causes the rod to sag or bend.
The only disadvantage with binder clips is that you'll have to check on them every once in a while as they contain a metal part that is prone to developing rust over time.
Some shower curtains come with magnets sewn into the hem, which helps to keep the curtain in place when it comes in contact with the tub.
Alternatively, you can purchase separate shower curtain weights or clips that have magnets in them. These can be attached to the bottom of the shower curtain and help to keep it in place.
Suction cups work by creating a seal against the tub or other surface to which they are attached, holding the shower curtain in place and preventing it from being blown around by drafts or other sources of air movement.
They are a simple and inexpensive solution for this problem and can be easily installed on most shower curtains.
However, it's important to note that the effectiveness of suction cups can vary depending on the specific material of the shower curtain and the smoothness of the surface to which they are attached.
In some cases, additional measures such as a shower curtain liner or weighted hem may be needed to keep the curtain in place.
Can You Waterproof A Transfer Bench?
Yes, you can! The process of waterproofing a shower bench is straightforward. All you need to do is apply a liquid rubber sealant to the bench and allow it to dry.
How To Waterproof A Transfer Bench Using Liquid Rubber Sealant
To waterproof a transfer bench using a liquid rubber sealant, follow these steps:
- Clean the surface of the bench thoroughly with mild detergent and water. Make sure to brush any dirt, dust, or debris on the surface.
- Allow the bench to dry completely.
- Use a paintbrush to apply the liquid rubber coating to the bench's surface. Make sure to cover the entire surface evenly and pay particular attention to any cracks or crevices where water can seep in. it is also equally important that you're in a well-ventilated area when applying the sealant.
- Allow the coating to dry completely according to the instructions on the package.
- Once the coating is dry, it should provide a waterproof barrier for the transfer bench.
See this liquid rubber waterproofing sealant on Amazon.
Should A Transfer Bench Have An Overhang?
An overhung transfer bench has a top that extends slightly beyond the edges of the bench itself.
This can be beneficial for moisture management because it helps to prevent water from pooling on the top of the bench.
When water accumulates on the bench, it will have a place to drain off the sides rather than staying on the bench's surface, where it could create a slipping hazard.
In addition, an overhung transfer bench can also be easier to clean because it has a slightly sloped surface that allows water and soap suds to run off more easily.
How Much Weight Can A Transfer Bench Hold?
In general, transfer benches have a weight capacity of at least 250 pounds, but some models may be able to support more.
It's always best to err on the side of caution and choose a transfer bench with a higher weight capacity than you need to ensure that it is safe and stable for use.
Where Should You Put A Transfer Bench?
Placing your transfer bench within the range of the showerhead will allow you to sit on the bench and easily reach the water while showering.
This can be especially important if you have mobility limitations that make it difficult to stand for long periods or use the transfer bench to enter and exit the shower safely.
Additionally, make sure the bench is positioned in a way that allows you to easily reach all of the controls for the shower, such as the temperature and flow of the water.
Should I Keep The Shower Curtain Closed Or Opened Between Showering?
It is generally better to keep the shower curtain open after showering to allow for proper ventilation and prevent mold and mildew growth.
This will help to keep your bathroom dry and prevent any unpleasant odors from developing.
However, if you don't have sufficient ventilation to dry the shower curtain, it may be best to keep it closed and wipe it down after each use.
You can also use a bathroom dehumidifier to help remove moisture from the air.
So there you have it, the perfect solution for those looking to adjust their shower curtain so that it won't get in the way of the shower bench.
Hopefully, this post has taught you how to adjust the shower curtain on the shower bench and not make it appear out of place.
Made it to the end? Check out these helpful related articles:
How High Do You Hang A Shower Curtain?