Skip to Content

Can You Use Siding Nails In A Roofing Nailer?

You are about to start installing siding in your house but notice that you only have a roofing nailer. So, can you use siding nails in a roofing nailer? We did the leg work and researched this question to find an answer for you. Let's get right into it!

Disclosure: We may get commissions for purchases made through links in this post.

Generally, you cannot use a siding nail with a roofing nailer and vice versa. The nails are different sizes and may not fit each other. Using a siding nail in a roofing nailer can pose risks to the device, your home, or even you.

Continue reading as we discuss why you can't use siding nails in a roofing nailer and the risks of doing so. We will also discuss their differences and how to use them properly.

Can You Use Siding Nails In A Roofing Nailer?

Carpenter using air nail gun installation of install in the new door

Although roofing and siding nailers look the same, they have different purposes, which is why they are termed differently. That is also true for roofing and siding nails.

A roofing nailer should only use roofing nails designed primarily to nail roofs, while siding nails should only be used for a siding nailer.

Siding Nails Versus Roofing Nails

Coil nails in roll for nailer gun on plywood

One of the main reasons you cannot use siding nails for a roofing nailer is that they have different nails. Siding nails have thin to no heads. Because they don't need to be changed as frequently, they are designed to remain in place.

See these galvanized siding nails on Amazon.

Steel nails for zinc roof isolated on white background

On the other hand, roofing nails have larger heads because they need to come out when you need to replace your roofing. Their heads make it easier to grab them out.

Another difference is the length of roofing and siding nails. Since the side panel is thick, a siding nail is longer than a roofing nail. This is why you cannot use a siding nail for a roofing nailer because it will not fit.

However, for one reason or another, if you insist on using a siding nail in a roofing nailer, ensure to accept the risks that it may give you.

One is that the siding is not attached tightly, and there can be some movement. This is because the nails do not perfectly fit the nailer. It can also damage the nailer if the nails get stuck.

Click here to see these roofing nails on Amazon.

Siding Nailer Versus Roofing Nailer

Installation of crown moldings trim on the ceiling of the using gauge finish nailer

As the name suggests, siding nailers are great for siding jobs. They come in different types and sizes, and they make the siding installation easier. They come with an air filter, so there is no dust when working with them.

Moreover, they have depth-drive adjustments that are perfect for different kinds of siding installation. You can adjust this option to achieve the depth that you need for your project.

They are also safe for children because they have a lock system to avoid accidental shooting.

Click here to see this siding nailer on Amazon.

However, a siding nailer is unsuitable for hard materials since they are mostly lightweight. They are also not ideal for long work hours because they do not have a coil-nail feature.

This means you need to refill many nails to the nailer while working.

Man using nail gun to attach asphalt shingles to roof

On the other hand, a roofing nailer is a device you use to nail roofing. They also come in different types that you can choose from. They are perfect for heavy-duty work, and their nails are durable for roofing applications.

Click here to see this roofing nail gun on Amazon.

However, one of its main drawbacks is that it is more expensive. They are also not suitable for tight spaces and are prone to jamming.

How Do You Use A Siding Nailer?

Siding nail gun, Can You Use Siding Nails In A Roofing Nailer?

The key to properly installing siding is using the nailer. Here are the steps:

  1. Before starting the job, check if your device is in good condition.
  2. Prepare yourself and take preventive measures by wearing the right gear to avoid untoward incidents, such as a mask and goggles.
  3. Load the nailer with the correct nails by pressing the magazine and securing it.
  4. Using the depth-drive adjustment, set the correct depth to complement the depth of the siding you need to nail.
  5. Turn on the device and start the nailing process. Always exercise caution when working.

How To Use A Roofing Nailer

Carpenter uses nail gun to attach asphalt shingles to roof

Roofing nailer makes the roofing installation easier and more durable. Here are the steps:

  1. Wear protective gear, especially eyewear.
  2. Use the right compressor that will keep up with the roofing nailer. Use a larger compressor if you use two or more nailers simultaneously.
  3. Open the nailer magazine and load it up with nails. Secure it in place until you hear the clicking sound.
  4. Set the firing mode. Some nailers have two modes which include the single and bump modes.
  5. Once you find the proper firing mode that fits your needs, you can start nailing.


See this compressor and nailer combo kit on Amazon.

What Are The Best Nails To Use For Siding?

In installing a new siding, choose the correct nails to make your project long-lasting.

One of the best nails to use for vinyl sidings are galvanized nails, aluminum, and any other type that are corrosion-resistant. They are very durable, which makes them ideal for installing sidings.

Can You Use Roofing Nails For Vinyl Siding?

Most homeowners wonder if they can use roofing nails for vinyl sidings. The answer is yes. One of the best roofing nails you can use for vinyl sidings is galvanized roofing nails.

They are durable, rust-resistant, and strong enough to withstand weather disturbances like storms and strong winds.

Is It Better To Use Nails Or Screws For Vinyl Siding?

Most homeowners cannot decide whether it is better to use nails or screws in their vinyl siding.

Nails are better options for vinyl sidings. Aside from its smooth body that can penetrate the vinyl siding quickly, you can use a hammer to nail it.

A screw, on the other hand, tends to lose its hold on the vinyl siding if it is installed too tight. They are easily influenced by pressure which makes them let go of the siding. Lastly, screws are more expensive than nails.

How Should You Nail Vinyl Sidings?

Vinyl sidings are one of the most popular choices for home sidings because they offer exceptional durability. Their correct installation can also add to how resistant they will be to damage.

One way to install them is by using a siding nail.

Here are the steps on how to properly nail vinyl siding:

  1. In every installation, whether it be sidings or roofing, you should allow a space for expansion and contraction. This is because the materials you use are sensitive to weather changes, including wood and metals.
  2. Choose the right nails. Siding nails come in various sizes; You can use galvanized roofing nails with a length that will not be too short or too long.
  3. If you want everything to stay in place, do not tighten the nails. Allow expansion between them, so you will not damage the nails and the siding.
  4. Target the correct location of the nails. Do not go too high or too low. Go in the middle for balance.
  5. Put a space between the nails, ensuring they're not too far or near each other.

Final Thoughts

Siding nail gun

Whether renovating or installing new siding, using the right materials is very important. Remember not to use a siding nail in a roofing nailer and vice versa. Although they look similar, they have different profiles and purposes.

A siding nailer should be exclusively used for sidings and roofing nails for roofing purposes. These devices use nails that differ in length that may not fit the devices.

If you don't have siding nailers and you're tempted to use siding nails in your roofing nailer, be aware of the risks involved.

Made it to the end? Check out these helpful related articles below!

How To Install Hardie Siding On A House [Step By Step Guide]

Roof Overlay Vs. Tear Off – Which Is Right For Your Home?

CertainTeed Landmark Driftwood Vs. Weathered Wood – Which Is Right For Your Home?