HOW TO INSTALL LUTRON SERENA SHADES

[STEP BY STEP GUIDE]

PREPARE YOUR TOOLS

• Drill (with 3/32 drill bits) • #2 Phillips screwdriver • Tape measure • Pencil

MARK WHERE YOU WILL PUT THE BRACKETS

Align the brackets on the front edge of the window trim (inside mounting) or against the window (outside mounting).

INSTALL THE BRACKETS

Place each of the brackets against where you've drilled. Then, using the screws provided by the manufacturer and a drill, drive the screws through the bracket's holes.

INSTALL THE SHADES

Hold the shade with both hands and slightly tilt its top to the window as you hook the front edge behind the battery release tabs into the brackets.